某型铜材料动态力学性能的数值模拟研究

采用一种高效的应力更新算法,运用Fortran语言编写Johnson—Cook本构模型的Vuamt子程序,模拟材料在高速冲击工况下的动态力学性能,研究塑性大应变、高应变率以及温度软化作用对材料力学性能的影响。     

复合材料组合梁的分布参数传递函数法分析模型

应用分布参数传递函数法分析了复合材料组合梁在轴压载荷作用下的振动与稳定性问题。通过引入对偶变量，利用Ｌｅｇｒｅｎｄｒｅ 变换和Ｌａｐｌａｃｅ 变换，建立了可进入Ｈａｍ ｉｌｔｏｎ 体系的混合能量变分原理，并推导出了结构在复频域内的状态空间控制方程， 从而得到了任意边界条件下组合梁振动与稳定性问题的传递函数精确解。分析了一阶和高阶横向剪切变形、转动惯量、细长比、材料各向异性等多种因素对组合梁固有频率和屈曲载荷的影响。文中最后给出了数值算例， 验证了本方法的有效性和适应性。     

非线性转子系统碰摩现象的动力学仿真

针对一类非线性转子系统 ,建立了碰摩模型。在此基础上 ,通过模型的动力学仿真分析 ,研究了非线性碰摩转子系统的同频、倍频、分频、拟周期和混沌振动及其出现特点。其中揭示的振动特征对转子系统的状态识别与诊断具有一定的意义     

导弹撞击角度与飞行时间两阶段控制制导律

为了实施饱和攻击,需要对撞击角度与飞行时间同时进行控制。通过一种导弹撞击角度与飞行时间两阶段控制制导策略实现导弹撞击角度与飞行时间控制。第一阶段:基于切换滑模思想在纵向通道内对导弹飞行时间进行精确控制,侧向通道制导指令采用传统的纯比例导引律。第二阶段:切换到含重力补偿轨迹调节最优制导律对撞击角度进行精确控制,与显式制导不同,该制导律显式包含重力补偿项。设计数值仿真验证撞击角度与飞行时间两阶段控制制导方法的有效性,仿真结果表明,所给出的撞击角度与飞行时间两阶段控制制导方法能够实现撞击角度与飞行时间的同时控制。     

填充式波纹夹层结构超高速撞击特性仿真

基于航天器空间碎片被动防护需求,对一种新型填充式波纹夹层结构进行超高速撞击仿真研究,分析超高速撞击过程以及结构的穿孔破坏情况和所形成的碎片云的特性,并与相同面密度Whipple结构进行对比。其撞击现象与Whipple结构相似,但其碎片云的头部速度小于Whipple结构,而径向膨胀最大速度和膨胀半角均大于Whipple结构。随撞击初速从3 km/s~10 km/s不断增大,波纹夹层结构的撞击穿孔尺寸变大,形状也更不规则。此外,结构中的填充树脂对碎片撞击能量的吸收贡献最大,后面板所吸收的能量所占比重较大,而前面板和波纹板对碎片撞击能量的吸收贡献较小。研究结果对空间碎片防护结构的设计具有一定的参考意义。     

加肋凹锥-环-柱结合壳结构参数分析

采用分区样条等参元法,分析了加肋凹锥 环 柱结合壳的应力和稳定性特点,研究了各项结构参数变化对结合壳应力和稳定性的影响,认为加肋凹锥 环 柱结合壳能有效降低锥柱结合部的纵向弯曲应力,但对于降低环向应力效果有限,建议在环壳段中部增加一档肋骨;半锥角的凹结合壳越大,嵌入环壳段的优势越明显;增大环壳与柱壳半径比可以有效降低环壳段中部的纵向弯曲应力.     

联合编队作战行动方案建模

研究联合编队的作战行动方案问题,首先需要建立合理的任务模型。在基本作战样式基础上,针对联合编队任务特点,设计了一种联合编队作战行动方案的建模方法。该模型包含对海攻击和对空防御等5种基本作战样式,结合规划和调度两方面的特点,提供了资源和系统状态的描述机制。实例证明建模方案不仅具有可行性,而且丰富了作战行动方案的建模理论,对联合编队作战系统的研究、决策和建设具有一定的参考价值。     

增程修正弹单炮多发同时弹着火控技术研究

针对大口径火炮使用增程修正弹打远修近问题,建立了增程修正弹单炮多发同时弹着的控制算法,仿真验证了算法可在不同射程上实现单炮多发同时弹着,对发挥舰炮作战效能具有一定的意义。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.